POS Terminal Battery

HLC has been producing lithium-ion batteries since 2014, and they can be a combination of different series and different parallels. We are a professional lithium battery solution provider and custom battery packs.

The page is about POS terminal battery information. They include POS machine, POS terminal, handheld POS machine, POS machine with printer, cash POS machine, billing POS machine, payment terminal.

Design scheme of intelligent battery based on POS machine

According to the customer’s requirements and specifications, design the intelligent battery pack matched with the host, and integrate the intelligent fuel gauge with communication protocol and battery safety protection into your solution, which can achieve the information sharing between the battery pack and the host, and finally achieve a reasonable , Efficient and safe battery management solutions.
In the design process of the whole scheme, the direction of achieving the most perfect integration with the host is to ensure the safety of the battery, the battery pack and the entire system, and the first consideration is to meet the corresponding design regulations and certification regulations. In recent years, due to the rapid development of lithium batteries, many portable products use the voltage measurement value to estimate the remaining battery capacity, but the relationship between the battery voltage and the remaining battery capacity will change with the discharge rate, temperature and battery aging. The error rate of the method can be up to 50%.
Due to the increasing market demand for products that last longer, more precise solutions are required when designing. Using a fuel gauge IC to measure the charge or drain of the battery will provide a more precise estimate of battery charge over a wide range of application power levels. At the same time, in order to ensure the safety and reliability of the lithium battery, multiple layers of protection must be adopted inside the battery pack to prevent the lithium battery from being damaged by overcharge, overdischarge or short circuit.

Protection Board (PCM): It is mainly a protection circuit designed for rechargeable battery packs (generally refers to lithium batteries). Due to the chemical characteristics of lithium batteries, it is necessary to provide overcharge, overdischarge, short circuit, overcurrent, etc. and overtemperature, etc. Protective function. In order to avoid the danger of burning and explosion.
Protection IC: The main protection function chip of the design scheme, which performs online monitoring of overcharge, over-discharge, overcurrent, short current and other functions of the cell. Make the cells work in a safe, stable and efficient range.
Overcurrent Protection Sheet (PTC): Mainly designed for secondary protection function. The PTC resettable fuse has the dual function of overcurrent protection and automatic recovery. PTC in battery products can prevent high temperature discharge of batteries and the occurrence of unsafe high currents.
Battery model: 18650 2S1P battery pack, or 103450-3.7V-1800mAh.
Field-effect transistor (MOSFET): MOSFET plays a switching role in the protection circuit, so that the voltage across the load will never increase or decrease, ensuring voltage stability.

What is the reason why the POS machine cannot be charged?

The battery level display may be a problem caused by a malfunctioning POS system. This problem is the easiest to solve. You can directly shut down and restart, which is equivalent to refreshing the data, and the total power display will return to normal.
There is a problem with the charger. This fault is the main reason why the POS machine cannot be charged. So how to judge the quality of the charger?
It’s actually very simple, just try a different charger. If the charger can be charged, it can be determined that the charger is broken.
The charger is in poor contact with the POS machine. It’s also very common because the POS user is not careful and the charger doesn’t get plugged in. The fix is simple: replace the socket back and forth.
There is a problem with the POS battery. Lithium batteries should be checked when faulty chargers and POS systems are found. If the battery is found to be bulging, it means that the battery is defective and needs to be replaced.
The POS machine itself has quality problems. Need to return to the factory for repair.

Check out our lithium battery model

Model	Capacity(mAh)	Voltage(V)	Diameter(mm)	Height(mm)	Weight(g)
EVE-ICR18650/20P	2000	3.7	18.35	65.00	45
EVE-INR18650/25P	2500	3.7	18.35	65.00	48
EVE-ICR18650/26V	2600	3.7	18.30	65.05	48
EVE-INR18650/29V	2850	3.7	18.30	65.00	44.5
Roofer-INR18650-2000A	2000	3.7	18.10	64.90	46.5
Roofer-INR18650-2200A	2200	3.7	18.4	65.1	45.7
Roofer-INC18650-2600A	2600	3.7	18.4	65.1	45.7
BAK- 18650C4	2200	3.7	18.3	65.0	44.0
BAK-B18650CA	2250	3.7	18.4	65.0	48.0
BAK-C18650CC	2600	3.7	18.4	65.0	48.0
BAK-H18650CH	2600	3.7	18.4	65.0	48.0
BAK-C18650CE	3000	3.7	18 4	65 0	49 0
BAK-H18650CB	2000	3.7	18.4	65.0	45.0
DMEGC-INR18650-20PA	2000	3.7	18.6	65.5	45.0
DMEGC-INR18650-26E	2600	3.7	18.25	64.95	47.0
DMEGC-INR18650-29E	2900	3.7	18.25	64.95	47.0

Model	Capacity(mAh)	Voltage(V)	Diameter(mm)	Height(mm)	Weight(g)
Samsung-INR18650-20S	2000	3.7	18.43	65.00	48.0
Samsung-INR18650-25R	2500	3.7	18.33	64.85	45.0
Samsung-ICR18650-26J1	2600	3.7	18.40	65.00	45.0
Samsung-INR18650-30Q	3000	3.7	18.33	64.85	48.0
Samsung-INR18650-35E	3350	3.7	18.55	65.25	50.0
LG-18650 HE2	2500	3.7	18.3	65.0	48.0
LG-18650 HD2	2000	3.7	18.3	65.0	48.0
LG-INR18650 MH1	3200	3.7	18.39	65.15	49.0
LG-INR18650 HG2	3000	3.7	18.39	65.15	49.0
LG-LG18650 MJ1	3500	3.7	18.39	65.15	49.0
Panasonic-UR18650-NSX	2600	3.7	18.50	65.30	45.8
Panasonic-NCR18650BE	3200	3.7	18.50	65.30	47.5
Panasonic-NCR18650PF	2900	3.7	18.50	65.30	46.5
Sony-US18650VTC4	2000	3.7	18.35	65.20	45.0
Sony-US18650V3	2250	3.7	18.20	64.9	43.6
Sony-US18650VTC5A	2500	3.7	18.35	65.0	47.1
Sony-US18650VTC6	3000	3.7	18.50	65.20	46.6

Why choose us, HLC?

HLC battery is one of China’s main players of lithium rechargeable battery pack products. Our main products are 18650 battery pack, lifepo4 battery, and lithium polymer battery. Our existing customized rechargeable battery products are widely used in consumer electronics, portable device, military, medical, financial, security, and other fields.

Reliable & Durable

1 Year Warranty

500 Cycle Lifespan

24*7 VIP Service

Please write down the battery basic characters, like voltage, capacity, current, max size etc. It can help you offer you a solution in details.

POS Terminal Battery

Design scheme of intelligent battery based on POS machine

2S1P 703048 7.4V 1000mAh Li-Polymer Battery

603450 2S 7.4V 1100mAh UN3480 Lithium ion Batteries

824070 2S 7.4V 2300mAh Lithium Power Pack

542850 2S 7.4V 750mAh Lithium Polymer Batteries

What is the reason why the POS machine cannot be charged?

Check out our lithium battery model

Why choose us, HLC?

Company

Product

Ask For A Quick Quote